Published October 16, 2026
By Anthony Pennacchi & Sons Team
Anthony Pennacchi & Sons Blog
Inspect Before or After? What South Florida Property Owners Get Wrong Before Starting Exterior Work
Inspect first. A scope built on what the surface looks like misses what is failing behind it, and the same problems come back.

The Short Answer
Inspect before you start. Exterior repair or restoration on a South Florida building that begins without a full condition assessment ends up scoped around what the surface looks like rather than what has actually failed. Those repairs miss the underlying cause, and the problems come back sooner than they should. An inspection first is what makes the scope accurate.
Why Skipping the Inspection Costs More Later
A common version of this mistake starts with an exterior paint job. Surface prep begins, and halfway through the crew finds stucco that has come loose behind the paint, or masonry joints that have failed underneath. Now the job needs repair work before painting can continue, which changes the cost and the schedule. An assessment before the job started would have put that repair in the original scope.
Waterproofing has its own version. A membrane laid over a surface with moisture damage or failing masonry traps the water instead of stopping it. The membrane can look perfect while the deterioration continues behind it. Inspecting before the membrane goes down prevents that.
Across every type of exterior work the pattern holds: what looks like one problem from the surface is often several problems at different depths, and only an inspection before the work begins shows the whole picture.
What a Pre-Work Inspection Should Cover
A thorough condition assessment of a South Florida building exterior should look at each of these on every accessible elevation:
- Stucco: cracking, delamination and loss of bond to the wall behind it
- Masonry: mortar deterioration, spalling and open joints
- Caulking at windows and doors: separation, cracking and hardening
- Expansion joints in concrete and masonry: missing or failed sealant
- Concrete columns, lintels and slab edges: spalling and exposed reinforcing steel
- Staining, efflorescence or biological growth that points to a moisture path
- Existing coatings, paint and earlier repair patches
On buildings that have been repaired before, the old patches deserve a close look. They often mark where the building keeps having trouble, and they are often where the next failure shows up.
The Right Order for Any Exterior Project
Reliable exterior projects follow the same sequence:
1. Condition Assessment
Inspect every elevation before any materials are ordered or the job is scoped.
2. Scope Based on Findings
Define the work from what the assessment found, not from how the surface looks.
3. Surface Preparation
Prepare the surface to address the actual failures, not just the visible top layer.
4. The Main Work
Carry out the planned work, whether that is waterproofing, coating, caulking or masonry restoration.
5. Review Against the Assessment
Check the finished work against what the original assessment found.
The usual mistake is starting at step three with a scope based on assumption. In South Florida, where more than one kind of failure often shows up on the same building, that leaves gaps. New caulking goes in while the loose stucco behind it is left alone. Masonry gets coated while open mortar joints keep letting water in. Inspecting first closes those gaps before they turn into callbacks.
How the Inspection Changes With the Work You Are Planning
Not every project needs the same depth of inspection, but every project needs one. The inspection scales with the work.
Exterior Painting
At minimum, the condition of the stucco and masonry and how well the existing paint is still bonded.
Waterproofing
Every possible water entry point: joints, caulking, surface cracks and any staining.
Masonry or Concrete Restoration
The structural elements and how deep the deterioration goes.
Caulking Replacement
A full inventory of joints on every elevation, not only the ones visible from the ground or the ones the owner has already spotted. Our post on caulking timing in South Florida covers when that work is best done.
What stays the same whatever the scope is the order: inspect, then scope, then work.
Start With an Assessment From Anthony Pennacchi & Sons
If you are planning exterior work on a South Florida home or commercial property, Anthony Pennacchi & Sons can assess the building's current condition and define an accurate scope before any work begins. Pricing follows that in-person inspection, in a written proposal with the scope and one total. Call (561) 475-0775, or contact us with details about your property and what you are planning.
Frequently Asked Questions
Can a Property Owner Do Their Own Pre-Work Inspection?
An owner can spot obvious surface problems: visible cracks, staining, or caulking that has pulled away from a joint. What is harder without experience is judging how deep those problems go and whether something small on the surface points to a larger failure behind it. A professional assessment reads what the surface findings mean for the wall behind them and for the scope of work needed to fix them.
What Is the Difference Between a Building Inspection and a Pre-Work Repair Assessment?
A building inspection looks at code and structural safety and may be required by a municipality or a lender. A pre-work repair assessment looks at the current condition of the exterior surfaces and envelope in relation to the work being planned. They serve different purposes. A repair assessment does not replace a formal building inspection, and a building inspection does not define a repair scope. For questions about what your building is required to have, your building department decides.
How Often Should a South Florida Building Get an Exterior Assessment?
There is no single right interval, but timing one at the end of the wet season makes sense. Months of rain and sun can open cracks, wear out caulking and create new moisture paths on surfaces that looked sound in spring. Catching those changes early keeps small maintenance items from growing into larger repair scopes. Call Anthony Pennacchi & Sons at (561) 475-0775 to arrange one.